EWCO 1200 System with pH control (pH 4-6) - Generate Hypochlorous Acid (HOCl) up to 600 ppm - $17,999

EWCO

Was: US $22,999.00
Now: US $17,999.00
SKU:
E-1200-PHC
Availability:
In Stock

EWCO 1200 System with pH Control

The EWCO 1200 system with pH control is designed to generate hypochlorous acid (HOCl) at an optimized pH (4-6) and up to 600 ppm. 

About the System

The EWCO 1200 model is an industrial-grade, low-maintenance, single stream system that generates hypochlorous acid (HOCl) in solution through the electrolysis of salt and water. The system uses patented electrolysis cells that are unique in that they generate a stable HOCl molecule that is electrically neutral and with high oxidation potential, contributing to its effectiveness against microbial pathogens. The system is capable of generating up to 600 ppm of hypochlorous acid at any pH value desired between pH 3.5 and pH 8. Included with the system is an ultrasonic level sensor to mount on your own holding tank. Once filled, the system will receive a signal to turn off automatically.

Technical

  • Model:   EWCO 1200 System - see system comparison
  • Stainless Steel Build: 304SS
  • Electrolysis Type:   Single Cell, Single Stream, Non-membrane Electrolysis
  • Power Supply:   110V/220V, 50/60Hz
  • E-1200 System Dimensions:   35 x 24 x 52 cm (13.8 x 9.5 x 20.5 inches)
  • E-1200 System Weight:   21.2 kg (47 lbs.)
  • Backboard Dimensions (pre-built): 140 x 81 x 30 cm (55 x 32 x 12 inches)
  • Backboard Weight (pre-built): 46 kg (100 lbs.)
  • Shipping Dimensions (in crate): 150 x 94 x 54 cm (59 x 37 x 21 inches)
  • Shipping Weight (in crate): 125 kg (275 lbs.)
  • Solution:   Hypochlorous Acid (HOCl)
  • Concentration:   10 to 600 ppm - see performance calculator
  • pH range: Acidic to Neutral (pH 3.5 - pH 8)
  • Oxidation-Reduction Potential (ORP):   > 1000 mV

Production Rates

  • Using Normal Salt Water Additive
    • Rate @450 ppm: 2 L/minute (0.5 gal./minute)
    • Rate @300 ppm: 3 L/minute (0.8 gal./minute)
    • Rate @225 ppm: 4 L/minute (1 gal./minute)
    • Rate @150 ppm: 6 L/minute (1.5 gal./minute)
    • Rate @75 ppm: 12 L/minute (3 gal./minute)
    • Rate @60 ppm: 16 L/minute (4.2 gal./minute)
    • Rate @50 ppm: 18 L/minute (4.8 gal./minute)
    • Rate @45 ppm: 20 L/minute (5.3 gal./minute)
    • Rate @40 ppm: 24 L/minute (6 gal./minute)
  • Using Acidified Salt Water Additive (HCl added)
    • Rate @600 ppm: 2 L/minute (0.5 gal./minute)
    • Rate @400 ppm: 3 L/minute (0.8 gal./minute)
    • Rate @300 ppm: 4 L/minute (1 gal./minute)
    • Rate @200 ppm: 6 L/minute (1.5 gal./minute)
    • Rate @100 ppm: 12 L/minute (3 gal./minute)
    • Rate @75 ppm: 16 L/minute (4.2 gal./minute)
    • Rate @70 ppm: 18 L/minute (4.8 gal./minute)
    • Rate @60 ppm: 20 L/minute (5.3 gal./minute)
    • Rate @50 ppm: 24 L/minute (6 gal./minute)

Included

  • EWCO 1200 System
  • Ultrasonic level sensor to mount on your own holding tank
  • Venturi pumps for pH control (by dosing Hydrochloric Acid - HCl)
  • Inflow water filter
  • Backflow preventer
  • Pressure regulator
  • Flow regulator valve
  • Installation and Operation Manuals

 

SDS

Calculators

Research

Regulatory Clearances for Food Contact

FDA FCN 1811USDA Organic