EWCO 300 Electrolyzed Water System
A compact, continuous single-stream system engineered in polished 316 Marine-Grade Stainless Steel. Generates hypochlorous acid (HOCl) solution from 20 to 300 ppm free available chlorine (FAC) using salt, water and electricity.
Flow & Production Rates
| Flow Rate | Standard Salt Water Additive | Acidified Additive (37% Hydrochloric Acid Added) |
|---|---|---|
| 1.5 L/min | 200 ppm HOCl | 300 ppm HOCl |
| 2.0 L/min | 150 ppm HOCl | 225 ppm HOCl |
| 3.0 L/min | 100 ppm HOCl | 150 ppm HOCl |
| 4.0 L/min | 75 ppm HOCl | 112 ppm HOCl |
| 5.0 L/min | 60 ppm HOCl | 90 ppm HOCl |
| 6.0 L/min | 50 ppm HOCl | 75 ppm HOCl |
Technical Specifications
| Model | EWCO 300 System |
|---|---|
| Electrolysis Architecture | Single-cell, single-stream, non-membrane electrolysis |
| Chassis Material | Polished 316 Marine-Grade Stainless Steel |
| Active Solution | Hypochlorous Acid (HOCl) |
| Concentration Range | 20 to 300 ppm FAC |
| Solution pH (by additive formula) | Formula 1 salt + water ≈ pH 7–8; Formula 2 salt + vinegar ≈ pH 6–7; Formula 3 salt + water + 37% hydrochloric acid ≈ pH 5–6. 37% hydrochloric acid is corrosive; follow the manual’s handling steps. Follow your EWCO 300 manual. |
| Oxidation-Reduction Potential (ORP) | 800 mV to 1100 mV |
| Power Requirements | 110V / 220V Universal (50/60 Hz) |
| Dimensions | 26.2 cm (W) x 41.8 cm (H) x 17 cm (L) |
| Operating Weight | 11.8 kg (26 lbs) |
What's in the Box
- EWCO 300 System in 316 Stainless Steel enclosure
- 4-Liter Salt Brine Additive Tank
- Heavy-Duty Mounting Brackets (2) for system & brine tank
- Complete Installation Hardware: Industrial plumbing fittings and braided transfer hoses
- Chlorine Test Paper Pack: For direct PPM verification
- pH Test Paper Pack: For instant pH monitoring
Documentation
Limited Warranty — EWCO 300
EWCO is a brand of HOCL LLC.
Download the EWCO Limited Warranty (PDF)
Limited Warranty to Original Purchaser
HOCL LLC warrants to you, the original purchaser, that your EWCO product will be free from defects in materials and workmanship when used under normal conditions for a period of one (1) year from the date the product was purchased.
Products covered under this warranty are the EWCO 300 systems. The components covered under this warranty include system power adapters, printed circuit boards, and electrolysis cells. All wear-and-tear parts inside the system—such as plumbing parts, solenoid valves, and pumps—are not covered under this warranty.
Proof of Purchase
You must be able to show us the date on which you purchased your product when you make a claim under this warranty. Your order confirmation or invoice is sufficient at the time of a warranty claim.
What This Warranty Does Not Cover
This warranty does not cover defects or damage caused by:
- Unapproved alterations to the EWCO system.
- Misuse or failure to follow installation and operating instructions in manuals provided with the system.
- Use of additives running through the electrolysis cell that are not described in the operation manual.
- Wear-and-tear parts that must be replaced periodically, such as plumbing parts, solenoid valves, and pumps.
- Improper electrical supply or exposure of power adapters or printed circuit boards to water, liquids, or extreme temperatures.
- Accidents or other events beyond our reasonable control, such as storm, fire, or transportation damage.
- Defects that happen after power adapters, electrolysis cells, or printed circuit boards have been tampered with.
Your Responsibilities
- Routine replacement of water filters for the water supply to prevent debris from entering the system.
- Ensuring a water supply that has a water hardness of less than 80 ppm.
- Maintaining a strainer for the additive supply that prevents debris from entering the electrolysis cell.
- Ensuring that the operation manual is followed when preparing the additive.
- Ensuring that the system is not exposed to extreme temperatures outside the limits detailed in the operation manual.
- Ensuring that your system is installed by a competent, qualified person following all local and national codes, and industry standards.
- Ensuring that water does not enter the compartments that house the electrical components and printed circuit boards.
What We Will Do About a Defect
We will either repair or replace the defective part. Replacement parts may be reconditioned parts.
We will not pay or be responsible for labor or defective/replacement part transportation costs, or for delays in repairing or failures to complete repairs caused by events beyond our reasonable control.
What You Must Do
- Contact HOCL LLC customer support as soon as you discover a problem with your EWCO system to obtain a return authorization.
- Pay for all transportation of the defective EWCO system or defective part to HOCL LLC for replacement or repair.